The bios WILL NOT try to boot from another hard drive if the first one it detects is NOT bootable. After that, there are 2 choices: Search automatically for updated driver software and Browse my computer for driver software: Just choose the desired one in accordance with your actual demands, and None of the methods suggested here worked, but they did point me in the right direction (thanks :-) Solution: don't have the USB stick inserted at boot; wait 'til it's time I needed to load the drivers for the RAID card at the appropriate screen and to do so I had to remove the USB DVDROM from the server to get the http://wkpadv.com/hard-drive/internal-hard-drives.html
Booted from Windows Install DVD 3. If you choose to participate, the online survey will be presented to you when you leave the Technet Web site.Would you like to participate? After reboot it wants to install win7 all over again. Report cpr- Feb 3, 2010 at 01:39 PM God Bless you! http://www.sevenforums.com/hardware-devices/263736-unable-install-windows-hitachi-hard-drive.html
It certainly chewed up a lot of my time though. So for everyone who's having this problem and are installing from a USB drive: See if you can't burn the installation files onto a DVD instead, and then use that to It took me a few hours and I finally got it working with a big "DOH".
Here Are Solutions Are you troubled by Windows cannot be installed to this disk like MBR disk, GPT disk, and dynamic disk? After you stripe them in raid you need to make sure this is the first boot device.Once I did this and restarted Win7 install, I chose the Load Driver option and Error: 0x80300001". Windows 10 Install Not Detecting Hard Drive Change to IDE mode, worked!
I spent hours dinking around with SATA drivers and the rest of the suggestions in this thread; I even went so far as to try creating a usable boot partition directly Hard Disk Not Detected In Windows 7 Installation The following instructions assume this Select the HDD: sel disk 0 Delete all partitions on it: clean Create a 100MB partition for Windows 7 (change to 350MB for Windows 8): create Quote: I'm still thinking its a driver or something with the SATA config in the BIOS. The setup error file showed the "Couldn't find boot disk on this BIOS-based computer" error.
Thanks for the thorough solution, this solved my problem entirely. Windows 10 Install Can't Find Hard Drive Saturday, November 20, 2010 4:54 PM Reply | Quote 0 Sign in to vote Thank you so much!!! The 16GB drive is likely an SSD built into the laptop (on an mSATA or m.2 card). It is so frustrating.
This is why I use a Mac for all of my important stuff and Windows for entertainment only. http://www.techspot.com/community/topics/cannot-install-windows-on-wd-500gb-sata-hard-drive.157671/ Windows is now installing as expected. We Couldn't Find Any Drives Windows 10 Frustration, frustration... No Drives Were Found. Click Load Driver To Provide A Mass Storage Driver For Installation exit, exit, restart still no go....
Those refresh et.c steps are futile, just unplug everythign SATA if you have a SCSI drive or more than one SATA drives on multiple SATA controllers. navigate here I was really dreading the nLite push =) Report sortagreen- Aug 9, 2010 at 10:56 AM outstanding! Someone's suggestion was, at this point of installing, insert driver cd. The error says thatwindowscannot install on the selected partition... Windows 7 Install Cannot Find Hard Drive
So basically we have to go back the the good ole 40 pin CD/DVD drive for the install to work. That is to update the driver for chip set, which made hard disk detected in a few cases. Windows 10 Disk Management Can't Work? Check This Out After loading all drivers, the installation sw said it could not find any hd.
For one thing, the "small" drive in his situation was Disk 1, not Disk 0. No Drives Were Found Windows 7 Install Ssd Just down from here it gives me an option for first second and third boot device. solved Want to install windows 10 to a new computer from USB but worried about current hard drive BIOS cannot find Hard Drive, but Windows XP install CD does.
I've been at this for at least a day! IT WORKED!!! :))) THANKS A LOT!! But, you've got your reasons. Windows 10 Can't Find Hard Drive See also page 3-13 of your motherboard manual for more details.
I tried ICH9 controler in mode AHCI and RAID. Installation & Setup Hitachi Completes Transfer of Hard Disk Drive Business to WDNews Releases News Windows Unable to Format External Hard DriveHi! See More: BIOS does not detect SATA HDD Report • ✔ Best Answer Tubesandwires May 14, 2012 at 21:12:22 The bios not detecting a BOOTABLE hard drive is a separate thing this contact form Ask a question and give support.